Washer Fluid Motor - not working

supratrboo said:

Hey guys -

Washer fluid motor seems not to be working , tank is full and wipers are working just no fluid will come out .. Any suggestions to trouble shoot before looking to replace it ?

Click to expand...

Have you already ruled out a pipe blockage? Does the motor run when you activate the washer? And the fuse is OK? Obvious, I know, but may as well check this stuff before getting a new motor.

supratrboo said:

Hey guys -

Washer fluid motor seems not to be working , tank is full and wipers are working just no fluid will come out .. Any suggestions to trouble shoot before looking to replace it ?

Click to expand...

It's real easy for the windshield washer hose to become pinched where it goes through the cowling on the left hand side. You need to make sure the hose is located in a narrow slot and not pinched. Mine was pinched with almost no washer fluid flow but everything worked fine after I relocated the hose into the slot. In fact I have enough flow now to wash my rear window. :dodgy: You need to pop off the left side of the cowling in order to fix a pinched hose. This is easy to do, just make sure the windshield seal is properly resealed when you put it back together.

Do you hear the pump making any noise ?