Rocker panel molding CLIPS

1132 Views 7 Replies 5 Participants Last post by Tigga, 2 mo ago

JamesTN

Discussion Starter · Mar 8, 2022

Hi all,
The rocket panel molding on the passenger side of my 2012 Karma came off. All the clips are broken. My Fisker guy said they are impossible to find anymore. I searched on this forum and found a part number that another member mentioned...

Clip - QUARTER TURN W BASE 9.0
Part number: C145010100000

But when I google that, nothing comes up. Can anybody point me in the right direction for some OEM clips? Or any clips that would work? I don't know where to go and all the body shops in Nashville say they are backed up for months.

Any help is greatly appreciated. Thank you.

Save

1 - 8 of 8 Posts

FriscoFisker

· #2 · Mar 10, 2022

Hey James, do you just need the Passenger side? I believe it is 8 clips per side. Let me know how many you need and we can help you.

Save

JamesTN

Discussion Starter · #3 · Mar 10, 2022

FriscoFisker said:
Hey James, do you just need the Passenger side? I believe it is 8 clips per side. Let me know how many you need and we can help you.

Thank you for the reply! Yes, it is the passenger side. I need to replace all of them- I count 9 clips total. Please let me know how to place and complete the order. Thank you!

Save

Diddymac

· #4 · Mar 14, 2022

JamesTN said:
Hi all,
The rocket panel molding on the passenger side of my 2012 Karma came off. All the clips are broken. My Fisker guy said they are impossible to find anymore. I searched on this forum and found a part number that another member mentioned...

Clip - QUARTER TURN W BASE 9.0
Part number: C145010100000

But when I google that, nothing comes up. Can anybody point me in the right direction for some OEM clips? Or any clips that would work? I don't know where to go and all the body shops in Nashville say they are backed up for months.

Any help is greatly appreciated. Thank you.

I recently purchased a 2012 Fisker Karma Ecosport and need the following parts.....If u don't have them could you direct me to where I could find them. I'm in Duluth, Ga

Upper and lower control arm right front passenger side
Spindle, Inner and outer tie rod
Stabilizer link
Shock
wheel spendle sensor
brake hose all for the front right passenger side
Front passenger wheel
I am in Duluth, Georgia. I can be contacted through: [email protected]

Save

FriscoFisker

· #5 · Mar 14, 2022

Diddymac said:
I recently purchased a 2012 Fisker Karma Ecosport and need the following parts.....If u don't have them could you direct me to where I could find them. I'm in Duluth, Ga

Upper and lower control arm right front passenger side
Spindle, Inner and outer tie rod
Stabilizer link
Shock
wheel spendle sensor
brake hose all for the front right passenger side
Front passenger wheel
I am in Duluth, Georgia. I can be contacted through: [email protected]

Hey Diddymac, our recommendation is to contact Karma Atlanta. They are very close to you and the majority of the 2018 Karma Revero parts will be compatible with your Fisker Karma.

Save

Diddymac

· #6 · Mar 15, 2022

FriscoFisker said:
Hey Diddymac, our recommendation is to contact Karma Atlanta. They are very close to you and the majority of the 2018 Karma Revero parts will be compatible with your Fisker Karma.

They are expensive at Karma atlanta. I was looking for used 2021 Fisker Karma or used 2018 Karma Evero parts. Please help

Save

steven

· #7 · Mar 16, 2022

When I bought my Karma new in 2012, the passenger rocker panel was broken off. They wanted to replace it, which meant painting the panel. I'm a little freaked out by paint shops and like to keep the factory applied paint. They epoxied the clips back on, problem solved.

Save

Tigga

· #8 · 2 mo ago

steven said:
When I bought my Karma new in 2012, the passenger rocker panel was broken off. They wanted to replace it, which meant painting the panel. I'm a little freaked out by paint shops and like to keep the factory applied paint. They epoxied the clips back on, problem solved.

Product Font Screenshot Advertising Electric blue

Edge Clips - Standard | SD Products | Industrial Fasteners & Components

<p align="justify">Edge Clips provide a secure fixing for two panels and are ideal for the quick assembly of dissimilar metals, wood and plastics. Barbs on the Edge Clip retain it in position meaning no screws or drilling is required.</p><p align="justify

www.sdproducts.co.uk

Our Products | Termax

U-Based Fasteners Click to learn more High Retention Fasteners Click to learn more Sealing Fasteners Click to learn more Plastic Fasteners Click to learn more Magnet Fasteners Click to learn more Tether Fasteners Click to learn more U&J Nuts Click to learn…

www.termax.com

See less See more

Save

1 - 8 of 8 Posts

Top Contributors this Month