Fisker Buzz Forums banner

iPhone users

1584 Views 4 Replies 4 Participants Last post by  Fabulist
Any iphone users out there ?

1. When you play bluetooth audio, is the coverart showing up on the screen or blank? (Mine is blank - error or are my Mp3 tagged badly?)

2. How are you charging - did you buy some accessory? (the phone has to sit upside down in the cup holder if you want to charge it

bdo
1 - 5 of 5 Posts
You can't share album art over a standard BT A2DP profile. My screen just shows pause/play (and next/last? - cant remember), no images.

Yeah, I use a 12v iPhone charger plugged into the cig adapter. I usually charge at night, so don't really use charging in the car. Some future SW update (6.14?) will re-enable the USB data link, at which time I believe you'll get a traversable menu of what's on your iPod, not sure about album art. Low priority IMHO versus the other SW issues.
For about $6-$9 you can get a short USB->iPhone cable that plugs into the USB jack in the armrest. That charges the phone and provides iPod connectivity.

-Brian
My dealer said don't use it currently, Fisker knows using that USB port will cause Command Center havoc. So much so that my SE had a plug in that port when I picked it up, to stop me using it for now.
siliconkiwi said:
You can't share album art over a standard BT A2DP profile. My screen just shows pause/play (and next/last? - cant remember), no images.

Yeah, I use a 12v iPhone charger plugged into the cig adapter. I usually charge at night, so don't really use charging in the car. Some future SW update (6.14?) will re-enable the USB data link, at which time I believe you'll get a traversable menu of what's on your iPod, not sure about album art. Low priority IMHO versus the other SW issues.
I have a super low-profile 12V to USB adapter plugged into the 12V plug in the console and and a retractable 30-pin Apple cable. I was also warned not to use the USB connector in the console until the next software release. The BT Audio works fine and I use the steering wheel controls for volume, previous-next, etc. rather than the command center.

-- Fab.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top