Fisker Buzz Forums banner

Fiskar

355 Views 15 Replies 5 Participants Last post by  Saleh
I have a problem with the Fiskar car, where the car screen, the speedometer and the gear buttons do not work for me (there is no current in the three parts) together, that the car is working
1 - 16 of 16 Posts
I have a problem with the Fiskar car, where the car screen, the speedometer and the gear buttons do not work for me (there is no current in the three parts) together, that the car is working
Hi Saleh,

Do all three light up when you first get in the car?

Do they go dark after 1 min?
. There is no illumination in the speedometer or on the screen. There is no current in the gearbox. It does not blink 3 times
. There is no illumination in the speedometer or on the screen. There is no current in the gearbox. It does not blink 3 times
Saleh,

How do you get into the car ? do any lights come on?
VCM may have lost wake up signal… which would require reprogramming.
  • Like
Reactions: 1
Have you checked your fuses? I have an issue with the screen but it I change out the 10 Amp fuse it works again
  • Like
Reactions: 1
Works on all parts of the car from the headlights and taillights to the engine and window with horn
I'll check the valve.
I find waking programming
Where can I find programming??
You have to have the fisker diagnostic tool to program. Depending where you are east coast or west coast USA there are a couple of people that can do it. Mainly myself on west coast or Joe on east coast.
هل هناك طريقه لتحريك السياره وجعله في وضعية الحياد
Is there a way to move the car and put it in neutral?
Thank you for interacting with me. I found the solution. There are cuts in the wires and rodents are the problem
  • Like
Reactions: 1
Thank you for interacting with me. I found the solution. There are cuts in the wires and rodents are the problem
Thank you for interacting with me. I found the solution. There are cuts in the wires and rodents are the problem
1 - 16 of 16 Posts
Top