Fisker Buzz Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter · #1 ·
Hi all, I have attached pictures of a CIU seal fix in the photo gallery, done by my Fisker dealer here in Montreal .. Hope it helps!
Regards,
Fiskeral69
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #4 ·
if you look at top of the page you will see "Quick Links" next to "Log out"
and then hit picture gallery.
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #8 ·
Hi Harleyguy, can you elaborate, Service manager said it was already sealed with silicone around the filter housing and that there was just a small gap which they filled next to it? ( you can see the black area).
tks
Fiskeral69
 

·
Registered
Joined
·
70 Posts
Thank's for your Info & Pictures.
I do mine this afternoon.
Take me less than 45 minutes to do the complete the job , realy easy and I change the cabin filter at the same time.( My Old Filter was really durty )

/Users/remi/Desktop/DSC_0080.jpg
/Users/remi/Desktop/DSC_0074.JPG
/Users/remi/Desktop/DSC_0081.jpg
/Users/remi/Desktop/DSC_0079.jpg
/Users/remi/Desktop/DSC_0075.JPG
/Users/remi/Desktop/DSC_0082.jpg
/Users/remi/Desktop/DSC_0076.jpg
/Users/remi/Desktop/DSC_0077.jpg
/Users/remi/Desktop/DSC_0078.jpg[/IMG]
 

·
Premium Member
Joined
·
3,063 Posts
Hi Harleyguy, can you elaborate, Service manager said it was already sealed with silicone around the filter housing and that there was just a small gap which they filled next to it? ( you can see the black area).
tks
Fiskeral69
I would to send you the Fisker bulletin in order to show you. The complete housing should be sealed not only the sides .
 

·
Registered
Joined
·
70 Posts
Thank's a million for this info Harleyguy,
I will fix like the bulletin suggest. It is so easy to access.
See you soon in Miami.
 

·
Registered
Joined
·
65 Posts
Discussion Starter · #12 ·
Hi Guys, Can you send me the bulletin or post a link , I just want to make sure my repair has been done correctly!
Tks
Fiskeral69
 
1 - 12 of 12 Posts
Top