RE: Wind Noise fix soft of
at the rear of the door frame is the plug for the div bar adjustment bolt, adjust the bolt to be slightly further up and towards the ouside of the car, this will pivot the top of the div bar inwards to the body. then pull the belt molding and roll the window up and close the door. loosem the window crank bolts and push the window upwards to seat it deeper under the roof molding, then re-tighten crank bolts. do not over tighen them or it will pull the top of the window back out form the seal. this has been successful in reducing the noise to the point that its no longer audible to the driver and very faint to the passenger setting next to it. Until the seal is redesigned to cover the rear edge of the glass, or the div bar is supported the last 3/4" the potential for noise will always be there.