Fisker Buzz Forums

Fisker Buzz Forums

Fisker Buzz Forums (https://www.fiskerbuzz.com/forums/)
-   Fisker Karma (https://www.fiskerbuzz.com/forums/13-fisker-karma/)
-   -   traction motors (https://www.fiskerbuzz.com/forums/13-fisker-karma/18650-traction-motors.html)

FiskerPhilly 12-23-2014 11:53 AM

traction motors
 
Last 2 new traction motors left in stock going into this car... (with a new rdm)

Fabulist 12-23-2014 12:20 PM

Quote:

Originally Posted by FiskerPhilly (Post 187922)
Last 2 new traction motors left in stock going into this car... (with a new rdm)

What is the plan for any future repairs? Are there any rebuilt ones available as a stopgap at least?

FiskerPhilly 12-23-2014 01:06 PM

Fisker has plenty more but tied up until new year. Apparently a warehouse move going on with Valmet and thats where alot of parts are.

Harleyguy 12-23-2014 06:18 PM

Yes rebuilt ones will be available between myself FiskerPhilly and Alex Pop we should have it handled .

SC Karma 12-23-2014 06:34 PM

Quote:

Originally Posted by FiskerPhilly (Post 187922)
Last 2 new traction motors left in stock going into this car... (with a new rdm)

FiskerPhilly, if you don't mind me asking, how much does a job like this cost with new RDM and traction motors?

FiskerPhilly 12-23-2014 08:23 PM

Cost is dependent on several factors such as which components, and warranty level. Without warranty and using all new components is at least $17500. However pricing changes with warranty considerably. Also as we get closer to resplining the motors ourselves we can offer much better options for out of pocket scenarios such as warranty covers the rdm replacement and labor and owner pays for TM rebuilds and gets all 3 components new (or better than new) at a third of that cost. Obviously warranty wouldnt pay for a resplined TM. But all $ could be applied to a new rdm thus covering the labor to pull everything out and apart. That would be covered by an original owner allotment. The 10 grand for motors is what hurts.

AlJOHN 12-24-2014 11:40 AM

are the hardened motor splines becoming available soon. I have to have the RDM replaced, if available, it would make sense to change the splines (rather than loctite) then.

Any time table Philly or Harley??

FiskerPhilly 12-24-2014 02:48 PM

Depends on whether youre looking to replace complete motord with new units or rebuild yours with hard splines. Dont have a firm timetable on either yet so I dont want to mislead you ;)

Harleyguy 12-24-2014 03:44 PM

The harden spine shafts are being made then the motors need to be rebuilt no word on time yet .

smggsm 12-25-2014 07:36 PM

H guy , f philly
Do u guys suggest updating the splines for the new motors too the ones with green circle?


Sent from AutoGuide.com Free App


All times are GMT -4. The time now is 02:49 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 02:49 PM.



Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0 PL2
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.